10-Port PoE Network Switch

Description 10-port POE switch NSW2020-10T-POE-IN

The 10-port POE switch provides 10×100Mbps network ports (RJ45), including 8 PoE ports, delivering standards-based power and data connectivity for networked security and surveillance devices within the defined electrical and environmental parameters.

Key Features

• 10×100Mbps network ports (RJ45), including 8 PoE ports for combined power and data over Ethernet.
• Switching capacity of 2 Gbps with forwarding performance of 1.49Mpps and a 448K bit packet buffer for efficient packet handling.
• IEEE 802.3, IEEE 802.3u, IEEE 802.3az, IEEE 802.3x, IEEE 802.3af, and IEEE 802.3at compliance, with PoE standard support for IEEE 802.3af/at.
• PoE ModeB (4578) operation with a maximum PoE power capacity of 88W and up to 30W for a single port, with ports 1 to 2 as prior ports.
• DC 48/51V power supply via adapter (100 to 240V, 50/60Hz) and a maximum power of 94W.
• Fanless design with 0 cooling fans, supporting operating temperatures from 0°C to 45°C (32°F to 113°F) and operating humidity from 10% to 90% (noncondensing).
• MAC address table capacity of 1K to support device identification and switching operations.
• Clear indicator set including POWER status, PoE-MAX utilization indication, and LINK/ACT states for link presence and data transmission.

These features support stable network operation by combining 100Mbps data ports with PoE delivery under IEEE 802.3af/at standards, controlled by a 2 Gbps switching capacity, 1.49Mpps forwarding performance, and a defined packet buffer. The MAC capacity and standards support enable structured switching behavior, while the indicator set provides immediate visual feedback on power input status, PoE power utilization relative to specification thresholds, and link/activity conditions. The defined operating temperature and humidity ranges, along with a fanless design, contribute to predictable performance in environments that fall within the specified limits, enhancing stability for connected security endpoints.

Usability is strengthened by the combination of 10 RJ45 ports, 8 of which provide PoE, enabling data and power through a single connection where compatible with IEEE 802.3af/at. Performance is supported by the stated switching capacity, forwarding rate, and packet buffer, which help maintain consistent traffic handling. The PoE-MAX indication and prior ports 1 to 2 assist with managing power resources across the total 88W PoE budget and 94W maximum power, while the clearly defined indicators for POWER and LINK/ACT assist with rapid status assessment and troubleshooting without additional tools.