Outdoor Wifi Client, Hikvision, DS-3WF0EC-2NT 2.4Ghz 300Mbps 500m Elevator Wireless Bridge

Description Outdoor Wifi Client, Hikvision, DS-3WF0EC-2NT 2.4Ghz 300Mbps 500m Elevator Wireless Bridge

General

• Product dimensions (width × height × depth): 90.8 mm × 57.87 mm × 187.87 mm
• Packaging dimensions (width × height × depth): 256 mm × 231 mm × 86 mm
• Weight (net): 0.26 kg (0.57 lb) per device
• Weight (gross): 0.8 kg (1.76 lb)
• Package Contents: Wireless Bridge × 2, Power Adapter (12 VDC, 1 A) × 2, 10/100 Mbps PoE Injector × 2, Mounting Tape × 4, Quick Start Guide × 1
• Packaging method: Paired packaging
• Operating temperature: -30 °C to 70 °C
• Operating humidity: 5% - 95% (non-condensing)
• Storage temperature: -40 °C to 80 °C
• Storage humidity: 5% - 95% (non-condensing)
• Mounting: Pole mounting
• Protection: IP55
• Power consumption: 1.89 W typical mode (1-channel 2MP IPC), max. 3.7 W

Wireless settings

• Maximum air interface transfer rate: ≤ 300 Mbps
• Wireless standard: IEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps)
• Operating frequency range: 2400 MHz ~ 2483.5 MHz
• Antenna gain: 7 dBi
• Antenna angle: (H) beam width [3 dB] 65°, (V) beam width [3 dB] 65°
• Transmitting power: 23 dBm @11n MCS0 (Note: Transmitting power may vary depending on local regulations.)
• Receiver sensitivity: -87±2 dBm @HT40 MCS0
• PTP (Point-to-Point): 50 Mbps/0.2 KM(HT40), 30 Mbps/0.5 KM(HT40)

Technical parameters

• Network interface: 2 × 10/100 Mbps RJ45 port
• LED indicator: Power indicator, LAN indicator, signal strength indicator
• Reset button: Physical reset button
• Power supply: 12-24 VDC passive PoE

Software features

• Application function: IFM, IPM
• Channel width: 10/20/40 MHz
• Channel selection: Automatic/manual selection
• Security mode: WPA2-PSK
• Security mechanism: Hiding the wireless network name
• Network protocol: NTP (network time synchronization), SADP (automatic IP address acquisition), HTTPS/HTTP (web management), SSH (management)
• Management method: HCP, Web, iVMS-4200, HPP
• System log: Syslog, Control Center information
• Update: Web, iVMS-4200, HCP, HPP
• HPP: Supports one-click activation and remote management via Hik-Partner Pro. Supported features:
  1. Restart the device
  2. Device recovery
  3. Show topology information
  4. Display the connection status between AP and CPE, including signal strength, background noise, send and receive speed
  5. Configure wireless settings, including operating mode, SSID, password, channel, channel width, transmit power
  6. Bridge alignment
  7. Spectrum scanning

Certificates

• EMC: CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
• Safety: CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
• Chemical composition: CE-RoHS (2011/65/EU), WEEE (2012/19/EU), Reach (Regulation (EC) No.1907/2006)
• Radio: EN 301 893, EN 300 440, EN 62311, EN 301 489-3, EN 301 489-17