Elevator Wireless Receiver & Transmitter Pair DS-3WF0BC-2NT(B)

Description Elevator wireless receiver transmitter (pair) DS-3WF0BC-2NT(B)

Elevator wireless receiver transmitter (pair) DS-3WF0BC-2NT(B) creates a point-to-point wireless bridge for network transmission. It works as a paired set for elevator applications with compact hardware and defined wireless performance.

Key Features

• Product dimensions are 90.8 mm × 187.87 mm × 57.87 mm (3.57'' × 7.39'' × 2.27'').
• Package dimensions are 256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38").
• Net weight is 0.26 kg (0.57 lb) per device and gross weight is 0.8 kg (1.76 lb).
• Packing list includes 2 wireless bridges, 2 power adapters (12 VDC, 1 A), 2 × 10/100 Mbps PoE injectors, 4 binding tapes, and 1 quick start guide.
• Packing method is pairing of two devices.
• Working temperature range is -30 °C to 70 °C (-22 °F to 158 °F).
• Storage temperature range is -40 °C to 80 °C (-40 °F to 176 °F).
• Working and storage humidity range is 5% to 95% with no condensation.
• Installation mode is pole mounting.
• Ingress protection rating is IP55.
• Typical power consumption is 1.89 W for 1-channel 2MP IPC and maximum is 3.7 W.
• Max transmission rate of air interface is ≤ 300 Mbps.
• Wireless standard is IEEE 802.11b/g/n with 2 × 2 MIMO 300 Mbps.
• Working frequency band is 2400 MHz ~ 2483.5 MHz.
• Antenna gain is 7 dBi.
• Antenna angle beamwidth is 65° horizontal and 65° vertical at 3 dB.
• Transmitting power is 19±2 dBm with dependence on local regulations.
• Receiving sensitivity is -68 ± 2 dBm @HT40 MCS7.
• Point-to-point transmission supports up to 6-channel 2MP IPC in maximum 0.2 km distance and maximum 30 Mbps bandwidth.
• Network interface includes 2 × 10/100 Mbps RJ45 ports.
• LED indicators show power, LAN status, and signal intensity.
• Reset function uses a hardware resetting button.
• Power supply is 12-24 VDC passive PoE.
• Application functions include IFM and IPM.
• Channel width options are 10 MHz, 20 MHz, and 40 MHz.
• Channel selection supports auto and manual modes.
• Supported network protocols are NTP, SADP, HTTPS, and SSH.
• Security mode is WPA2-PSK.
• Security mechanism includes hidden wireless network name.
• Management and upgrade methods are Web, iVMS-4200, and HCP.
• System log function includes Syslog and control center information.
• EMC approvals include CE-EMC with EN 55032:2015+A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019, EN 50130-4:2011+A1:2014, and EN 55035:2017+A11:2020.
• Safety approvals include CB (AMD1:2009, AMD2:2013, IEC 62368-1:2014 Second Edition) and CE-LVD (EN 62368-1:2014+A11:2017).
• Chemistry approvals include CE-RoHS (2011/65/EU), WEEE (2012/19/EU), and Reach (Regulation (EC) No.1907/2006).
• Radio standards include EN 301 893, EN 300 440, EN 62311, EN 301 489-3, and EN 301 489-17.

The IP55 rating and wide working temperature and humidity ranges support consistent operation in varied conditions. Multiple EMC, safety, chemistry, and radio approvals confirm standardized performance levels.

Web, iVMS-4200, and HCP management interfaces give clear control paths for setup and monitoring. Simple LED indicators and a hardware reset button help with basic operation and status checking.