Switch POE DS-3E1518P-EI

Description Switch POE DS-3E1518P-EI

General
ShellMetal material
Net weight 2.85 kg (6.28 lbs)
Total weight 3.05 kg (6.72 lbs)
Dimensions (W × H × D) 440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')
Operating temperature 0 °C to 45 °C (32 °F to 113 °F)
Storage temperature -40 °C to 85 °C (-40 °F to 185 °F)
Operating humidity 5% to 95% (non-condensing)
Relative humidity 5% to 95% (non-condensing)
Power supply 100~240 V AC, 50/60 Hz, max. 4 A
>span class="tech-specs-items-description__title-details">Rack (equipped with mounting ears)
Max. power consumption 250 W
Power consumption in idle mode 20 W
Power protection 6 kV
Network settings
Ports 16 × Gigabit PoE port, 1 × Gigabit RJ45 port, 1 × Gigabit fiber optic port
MAC address table8K
Switching capacity 56 Gbit/s
Packet forwarding speed 41.66 Mpps
Internal cache 4.1 MB
PoE power supply
PoE Standard IEEE 802.3af, IEEE 802.3at
PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortPoE: Ports 1 to 16
Max. port power 30 W
PoE power budget 230 W
Software function
Long range ports 1 to 16: up to 300 m. Long range operation may vary depending on camera model or cable condition.
Port isolation
Ports 1 to 16: Port isolation mode to improve network security.

Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE WatchdogPorts 1 to 16: Automatically detect and reset cameras that are not responding.
Link aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

Support for static link aggregation.

8 aggregation group support.

Loop prevention
Loop prevention is used to prevent the occurrence of loops in a switched network, which can seriously affect network communication. It is disabled by default.

Support for 802.1D STP.

802.1w RSTP support.

VLAN
VLAN is used for network-wide planning and to improve network health.

Support for 802.1Q.

Configurable VLAN ID from 1-4094.

Support Trunk, Access port mode.

Supports max. 32 VLANs.

Hess
Support one-click activation and remote management via Hik-Partner Pro. Supported features:

1. Display port speed.

2. Display the port bandwidth usage rate.

3. Show PoE power consumption.

4. Display topology information.

5. Alarm status display.

6. Reboot the ports and devices.

7. Enable the port's long-range rage mode.

8. Remotely update the device.

System maintenance
Support for device management via the Internet.

DHCP client support. Enabled by default for dynamic assignment of management IP addresses.

Support for Super IP, which is a fixed IP address (10.180.190.200) for direct access.

Remote control support via Hik-Partner Pro.

Support cable detection. Abnormal open circuits and short circuits, as well as the length of the network cable, can be detected.

Support for 802.1ab LLDP-like device discovery.

Support for port mirrors for fault location.

Approval
EMCCE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN)
Security
CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);

CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

ChemistryCE-RoHS (2011/65/EU); WEEE (2012/19/EU); REACH (Regulation (EC) No.1907/2006)