Switch POE DS-3E1518P-SI

Description Switch POE DS-3E1518P-SI

General
ShellMetal material
Net weight 2.735 kg (6.03 lbs)
Total weight 3.31 kg (7.30 lbs)
Dimensions (W × H × D) 440 mm × 44 mm × 220.8 mm (17.32" × 1.73" × 8.69")
Operating temperature 0 °C to 45 °C (0 °F to 113 °F)
Storage temperature -40 °C to 85 °C (-40 °F to 185 °F)
Operating humidity 5% to 95% (non-condensing)
Relative humidity 5% to 95% (non-condensing)
Power supply 100 to 240 VAC, 50/60 Hz, max. 4 A
Max. power consumption 250 W
Power consumption in idle mode 25 W
Surge Protection6 KV surge protection for PoE ports.
Network settings
Ports 16 × Gigabit PoE port, 2 × Gigabit fiber optic port
MAC address table8K
Switching capacity 56 Gbit/s
Packet forwarding speed 41.66 Mpps
Internal cache 4.1 MB
PoE power supply
PoE Standard IEEE 802.3af, IEEE 802.3at
PoE Power PinEnd-span: 1/2(+), 3/6(-);
PoE PortPoE: Ports 1 to 16
Max. port power 30 W
PoE power budget 225 W
Software function
Long range
Ports 1 to 16: up to 300 m.

Long-distance operation may vary depending on the camera model or cable condition.

Port isolation
Ports 1 to 16: Port isolation mode to improve network security.

Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE WatchdogPorts 1 to 16: Automatically detect and reset cameras that are not responding.
Link aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

Static link aggregation support.

Support up to 8 aggregation groups.

QoS
QoS is used to allocate bandwidth to different services to ensure end-to-end quality of service.

Support for port-based priority configuration.

Support SP, WRR priority schedule mode.

Loop prevention
Loop prevention is used to prevent the occurrence of loops in a switched network, which can seriously affect network communication. It is disabled by default.

Support for 802.1D STP.

VLAN
VLAN is used for network-wide planning and to improve network health.

Support for 802.1Q.

Configurable VLAN ID from 1-4094.

Support Trunk, Access port mode.

Supports max. 4094 VLANs.

Hess
Support one-click activation and remote management via Hik-Partner Pro. Supported features:

1. Display port speed.

2. Display the port bandwidth usage rate.

3. Display topology information.

4. Alarm status display.

5. Reboot the ports and devices.

6. Remotely update the device.

System maintenance Remote update, restore default settings, view logs, configure basic network settings, import and export configuration, time synchronization
Port Rate-LimitingPort rate-limiting is used to adjust port bandwidth to prevent network congestion.
Storm control
Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in a LAN, which can affect network communication.

Support for port rate limiting based on broadcast, multicast, and unknown unicast packets.

Approval
EMC
FCC (47 CFR Part 15, Subpart B);

CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, 7: EN);

IC (ICES-003: Issue 6);

RCM (ASNZS CISPR 32:2015)

Security
UL (UL 60950-1);

CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);

CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

Chemistry
CE-RoHS (201165EU);

WEEE (201219EU);

Reach (Regulation (EC) No.19072006)