Switch POE DS-3E1526P-EI/M

Description Switch POE DS-3E1526P-EI/M

General
Shell
Metal material
Net income
2.96 kg (6.52 lbs)
Total weight
3.2 kg (7.05 lbs)
Dimensions (W × H × D)
440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')
Operating temperature
0 °C to 45 °C (0 °F to 113 °F)
Display temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating humidity
5% to 95% (non-condensing)
Relative humidity
5% to 95% (non-condensing)
Energy source
100~240 VAC, 50/60 Hz, max. 4 A
Installation mode
Shelf (equipped with mounting ears)
Max. Power Consumption
250 W
Idle power consumption
30 W
Power protection
6 sq.
Network settings
Ports
24 × Gigabit PoE port, 1 × Gigabit RJ45 port, 1 × Gigabit fiber optic port
MAC address table
8 k
Switching capacity
56 Gbps
Packet forwarding speed
41.66 Mpps
Internal cache
4.1 Mbit
PoE power supply
PoE standard
IEEE 802.3af, IEEE 802.3at
PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE port
PoE: Ports 1 to 24
Max. port capacity
30 W
PoE power budget
230 W
Software function
Long range
Ports 1 to 24: up to 300 m.

Long-distance operation may vary depending on the camera model or cable condition.

Port isolation
Ports 1 to 24: Port isolation mode to improve network security.

Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog
Ports 1 to 24: Automatic detection and reset of unresponsive cameras.
Link aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

Static link aggregation support.

Support up to 8 aggregation groups.

Loop prevention
Loop prevention is used to prevent the occurrence of loops in a switched network, which can seriously affect network communication. It is disabled by default.

Support for 802.1D STP.

802.1w RSTP support.

VLAN
VLAN is used for network-wide planning and to improve network health.

Support for 802.1Q.

Configurable VLAN ID from 1-4094.

Support Trunk, Access port mode.

Supports max. 32 VLANs.

Hess
Support one-click activation and remote management via Hik-Partner Pro. Supported features:

1. Display port speed.

2. Display the port bandwidth usage rate.

3. Show PoE power consumption.

4. Display topology information.

5. Alarm status display.

6. Reboot the ports and devices.

7. Enable the port's long-range rage mode.

8. Remotely update the device.

System maintenance
Device management support via web page.

DHCP client support. Enabled by default for dynamic assignment of management IP addresses.

Support for Super IP, which is a fixed IP address (10.180.190.200) for direct access.

Remote control support via Hik-Partner Pro.

Support cable detection. Abnormal open circuits and short circuits, as well as the length of the network cable, can be detected.

Support for 802.1ab LLDP-like device discovery.

Port mirroring support for fault location.

Approval
EMC
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011: EN554+A 2017+A11: 2020)
Danger
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry
CE-RoHS (201165EU);

WEEE (201219EU);

Reach (Regulation (EC) No.19072006)