Switch POE DS-3E1526P-SI

Description Switch POE DS-3E1526P-SI

General
Shell
Metal material
Net income
2.975 kg (6.56 lb)
Total weight
3.535 kg (7.79 lb)
Dimensions (W × H × D)
440.00 mm × 44.00 mm × 221.00 mm (17.32'' × 1.73'' × 8.70'')
Operating temperature
0 °C to 45 °C (0 °F to 113 °F)
Display temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating humidity
5% to 95% (non-condensing)
Relative humidity
5% to 95% (non-condensing)
Energy source
100 to 240 VAC, 50/60 Hz, max. 6.3 A
Installation mode
Shelf (equipped with mounting ears)
Max. Power Consumption
400 W
Idle power consumption
30 W
Power protection
6 sq.
Network settings
Ports
24 × Gigabit PoE ports, 2 × Gigabit fiber optic ports
MAC address table
8 k
Switching capacity
56 Gbps
Packet forwarding speed
41.66 Mpps
Internal cache
4.1 Mbps
PoE power supply
PoE standard
IEEE 802.3af, IEEE 802.3at
PoE Power Pin
Last range: 1/2(+), 3/6(-);
PoE port
PoE: Ports 1 to 24
Max. port capacity
30 W
PoE power budget
370 W
Software function
Long range
Ports 1 to 24: up to 300 m.

Long-distance operation may vary depending on the camera model or cable condition.

Port isolation
Ports 1 to 24: Port isolation mode to improve network security.

Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog
Ports 1 to 24: Automatic detection and reset of unresponsive cameras.
Link aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

Static link aggregation support.

Support up to 8 aggregation groups.

QoS
QoS is used to allocate bandwidth to different services to ensure end-to-end quality of service.

Support for port-based priority configuration.

Support SP, WRR priority schedule mode.

Loop prevention
Loop prevention is used to prevent the occurrence of loops in a switched network, which can seriously affect network communication. It is disabled by default.

Support for 802.1D STP.

VLAN
VLAN is used for network-wide planning and to improve network health.

Support for 802.1Q.

Configurable VLAN ID from 1-4094.

Support Trunk, Access port mode.

Supports max. 4094 VLANs.

Hess
Support one-click activation and remote management via Hik-Partner Pro. Supported features:

1. Display port speed.

2. Display the port bandwidth usage rate.

3. Display topology information.

4. Alarm status display.

5. Reboot the ports and devices.

6. Remotely update the device.

System maintenance
Remote update, restore default settings, view log, configure basic network settings, import and export configuration, time synchronization
Port tariff restriction
Port rate limiting is used to regulate port speeds to prevent network congestion.
Storm control
Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in a LAN, which can affect network communication.

Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Approval
EMC
FCC (47 CFR Part 15, Subpart B);

CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, 7: EN);

IC (ICES-003: Issue 6);

RCM (ASNZS CISPR 32:2015)

Danger
UL (UL 60950-1);

CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);

CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

Chemistry
CE-RoHS (201165EU);

WEEE (201219EU);

Reach (Regulation (EC) No.19072006)